Cascading Creations

Tape measures come in numerous styles. For measuring rooms, or huge areas, the heavy duty style, in case that pulls open, snaps shut is usually utilized. Tape measure also comes in soft material, utilized by the dress maker, and to measure a hem and everything in between. Knowing what measurement it shows is essential in any task. Here’s how to use tape measures:

Hold the front of the measuring tape at the point in which you wish to begin the measurement and extend it to the point where you like to stop. Look at the 1st large number before your stop point, this will inform you the number of inches. Look at the smaller lines of various sizes (remembering what the various sizes mean) until your stop point. This will show you your fraction of an inch. If you like to learn how to read a tape measure, then here is a step wise guide on the same.

Just before learning how to read tape measures, it is vital to understand the units of measurement. Tape measures are divided into a number of feet, and 12 inches make one foot. 1 inch, on tape measures, is further divided into sixteen parts, which are depicted by 16 lines in between two whole numbers. Thus, if a measurement reads 2′ 8-5/16”, it should be read as “two feet, eight and five sixteenths inches”. If you are confused, here is for you to learn how to read a tape measure in inches, in great detail.

For you to learn how to read tape measures, you could start by drawing a straight line on an ordinary paper. Mark a spot on this line that you will measure. Then, place the tape measure on the line. At this point, look for a whole number on the measuring tape that’s closest to the mark you want to measure. Make sure you find the number which is before the mark, and not the one after it. For example, if the mark falls in between six and seven on the tape measure, you’ll read six and definitely not seven. So if the mark is reading 6, that implies that the length of the line until that point is six inches and “a few more”.

Now learning how to determine this “some more” in tape measures; If the mark you have made on the line falls exactly on 6, it means that the length of the line is 6 inches. However, if the mark is a little ahead of the whole number six, in that case, you have to measure the sub divisions of the inch as well. Thus, you’ll have to count the number of lines that fall between the whole number six and the mark. In this case, the whole number is six and if the number of lines between this number and the mark to be measured is four, the length of the line up until the mark will be read as “six and four sixteenths” inches. The fraction “four sixteenths” can be further simplified as “1/4″. As the measurement must always be presented in the most simplified forms, so, in this instance, the measurement would read “six and one-fourth” inches.

A Tape Measure must always be convenient since it is a unique instrument for the Construction and Industrial expert. Tape Measures are very flexible and enables one to measure around curves or corners.